Tony’s Burson V5i Opamp with Topping A30

• Frequency response: 10 Hz – 200 kHz
• Output impedance: not published
• Gain: 0 / 9 / 18 dB
• Inputs: RCA
• Input sensitivity: 10.0 V (0 dB) / 3.3 V (9 dB) / 1.2 V (18 dB) at PO=Hi
• Outputs: RCA line out; 6.35 mm + 3.5 mm headphone
• Other: max output swing 26.6 Vpp; THD+N 0.0019% (32 Ω, 0 dB gain); SNR 126/121/111 dB by gain; noise 2.2 µV (A, 32 Ω, 0 dB); headphones 16-600 Ω; power per load not shown on retailer page

^[1]

• Supply voltage: ±5 V / 10 VDC to ±16 V / 32 VDC (absolute maximum)
• Gain-bandwidth product: 50 MHz (at 100 kHz)
• Dual or single: dual and single
• Package: 11 mm wide × 11 mm deep × 7.3 mm high

^{[2] [3]}

Specs from manufacturer data unless a source below says otherwise. “calc.” values are worked out from those figures (V = √(P × R); 110 dB SPL used as a loud reference level). Gear listed without specs is not in our spec library yet.

1. Topping A30: apos.audio (retailer)
2. Burson V5i Opamp datasheet V1.0
3. Burson V5i Opamp product page