Ralph’s Burson V5i Opamp with Razer Tiamat 7.1 and Razer Tiamat 7.1 V2

Published on

Post Info

Nice Product! Works very well! I really like it!

The System

Listening with

Razer Tiamat 7.1 · Headphones: circumaural, 10-driver analog 7.1
  • Impedance: 16 ± 15% (subwoofer); 32 ± 15% (front, center, side, rear)
  • Sensitivity: 116 ± 3 (subwoofer); 123 ± 3 (front and center); 120 ± 3 (side and rear) dB @ 1 kHz (reference not stated)
  • Frequency response: 20 Hz – 20 kHz
  • Plugs / cables supplied: 4 x 3.5 mm audio jacks; 3.5 mm mic; 3 m braided cable
  • Other: drivers per ear: 40 mm subwoofer, 30 mm front, 30 mm center, 20 mm side, 20 mm rear

[3]

Razer Tiamat 7.1 V2 · Headphones: circumaural, 10-driver analog 7.1
  • Impedance: 16 ± 15% (subwoofer); 32 ± 15% (front, center, side, rear)
  • Sensitivity: 118 ± 3 (subwoofer); 115 ± 3 (front and center); 118 ± 3 (side and rear) dB @ 1 kHz (reference not stated)
  • Frequency response: 20 Hz – 20 kHz
  • Plugs / cables supplied: 4 x 3.5 mm audio jacks; 3.5 mm mic; 3 m braided cable
  • Other: drivers per ear: 40 mm subwoofer, 30 mm front, 30 mm center, 20 mm side, 20 mm rear

[4]

Burson

Burson V5i Opamp · Discrete opamp (single / dual) · current
  • Supply voltage: ±5 V / 10 VDC to ±16 V / 32 VDC (absolute maximum)
  • Gain-bandwidth product: 50 MHz (at 100 kHz)
  • Dual or single: dual and single
  • Package: 11 mm wide × 11 mm deep × 7.3 mm high

[1] [2]

Specs from manufacturer data unless a source below says otherwise. “calc.” values are worked out from those figures (V = √(P × R); 110 dB SPL used as a loud reference level). Gear listed without specs is not in our spec library yet.

  1. Burson V5i Opamp datasheet V1.0
  2. Burson V5i Opamp product page
  3. Razer Tiamat 7.1: mysupport.razer.com
  4. Razer Tiamat 7.1 V2: mysupport.razer.com