Nathan Burson Soloist 3X GT with Denafrips Venus II and Meze Empyrean

Nathan’s Burson Soloist 3X GT with Denafrips Venus II and Meze Empyrean

Published on

Post Info

Love all three Burson products I own.

The System

Listening with

Denafrips Venus II
Meze Empyrean · Headphones: open-back, isodynamic hybrid array (planar), circumaural · discontinued
  • Impedance: 31.6 Ω
  • Sensitivity: 100 dB SPL (1 mW / 1 kHz) ≈ 115.0 dB/V (calc.)
  • Frequency response: 4 Hz – 110 kHz
  • Plugs / cables supplied: 4-pin mini-XLR cable; 3 m OFC XLR cable
  • Other: max SPL >130 dB; THD <0.1%; ~430 g; Rinaro driver

Matching notes: At 31.6 Ω and 100 dB/mW, the Meze Empyrean is a low-impedance load, and an efficient one: about 0.56 V (10 mW, 18 mA) for 110 dB SPL (calc.). Burson does not publish a 31.6 Ω rating for the Soloist 3X GT. Its 16 Ω and 32 Ω ratings (10 W XLR / 5 W SE; 8 W XLR / 4 W SE) fall either side of it. The Soloist 3X GT’s 0.5 Ω headphone output impedance is 1/63 of the load. [1] [2] [3]

Burson

Burson Soloist 3X GT · Headphone amplifier / preamp (Class-A) · discontinued
  • Output power (XLR / SE): 16 Ω 10 W / 5 W · 32 Ω 8 W / 4 W · 100 Ω 3.8 W / 1.9 W · 300 Ω 1.3 W / 0.65 W · 600 Ω 0.64 W / 0.32 W
  • Output impedance: 0.5 Ω (headphone); 25 Ω (pre out)
  • Gain: High / Medium / Low; dB not published
  • Inputs: 2x XLR; 2x RCA; mic bypass
  • Input impedance: 35 kΩ
  • Input sensitivity: line level
  • Outputs: XLR + RCA pre out; RCA subwoofer out; 4-pin XLR + SE headphone
  • Other: Model R-120X (“GT3”); THD <0.0015%; FR ±1 dB 0-48 kHz

[2] [3]

Specs from manufacturer data unless a source below says otherwise. “calc.” values are worked out from those figures (V = √(P × R); 110 dB SPL used as a loud reference level). Gear listed without specs is not in our spec library yet.

  1. Meze Empyrean: archived page (web.archive.org)
  2. Burson Soloist 3X GT product page
  3. Burson Soloist 3XGT User Manual V2.0 (Burson downloads)