Calvin’s Burson Funk with Sony SS CS5, beyerdynamic T1 and Focal Elegia

Published on

Post Info

Very nice as expected

The System

Listening with

Sony SS CS5
beyerdynamic T1
Focal Elegia · Headphones: closed-back, dynamic (40 mm Al/Mg M-dome), circumaural · discontinued
  • Impedance: 35 Ω
  • Sensitivity: 105 dB SPL / 1 mW @ 1 kHz ≈ 119.6 dB/V (calc.)
  • Frequency response: 5 Hz – 23 kHz
  • Plugs / cables supplied: 3.5 mm cable (1.2 m) (per datasheet)

Matching notes: At 35 Ω and 105 dB/mW, the Focal Elegia is a low-impedance load, and an efficient one: about 0.33 V (3.2 mW, 9.5 mA) for 110 dB SPL (calc.). Burson does not publish a 35 Ω rating for the Funk. Its 32 Ω and 100 Ω ratings (2.5 W SE; 0.6 W SE) fall either side of it. The Funk’s under 2 Ω headphone output impedance is less than 1/18 of the load. [1] [2] [3] [4] [5]

Burson

Burson Funk · Headphone amplifier / integrated amplifier
  • Output power (headphone): 16 Ω 3.5 W · 32 Ω 2.5 W · 100 Ω 0.6 W · 150 Ω 0.4 W · 300 Ω 0.15 W
  • Power: 8 Ω: 35 W · 4 Ω: 45 W
  • Output impedance: <2 Ω (headphone)
  • Gain: not published
  • Inputs: RCA L/R
  • Input impedance: 38 kΩ
  • Outputs: headphone (SE); speaker terminals
  • Other: Model P-300; THD <0.03%; FR ±1 dB 0-35 kHz; speaker S/N 92.5 dB

[3] [4] [5]

Also in the system

Denafrips Ares

Specs from manufacturer data unless a source below says otherwise. “calc.” values are worked out from those figures (V = √(P × R); 110 dB SPL used as a loud reference level). Gear listed without specs is not in our spec library yet.

  1. Focal Elegia: PDF (dam.focal-naim.com)
  2. Focal Elegia: focal.com
  3. Burson Funk product page (funk page)
  4. Burson Funk product page (funk page, archived 2021)
  5. Burson Funk User Manual V1.5 (Burson downloads)