Aleksandar’s Burson V5 Opamp with TEAC UD 501 and Dynaudio Contour S 3.4

Published on

Sales Burson
June 2, 2016

Post Info

Feedbacks - V5 SS Opamp
Bladelius Thor MK2, Dynaudio Contour S 3.4, TEAC UD 501

I am very satisfied with the sound Burson. V5 was not well matched with Teac UD 501, I expect that we know V5i be good with Teac UD 501. Burson company has a lot of knowledge, I hope that the V5 will get its successor.

The System

Listening with

TEAC UD 501 · DAC: dual-mono USB DAC with headphone amp (DSD native) · discontinued

Frequency response: 5 Hz – 80 kHz (-3 dB)
Output power (headphone): 32 Ω 0.1 W
Output impedance: 22 Ω (RCA); 88 Ω (XLR)
Output voltage: RCA 2.0 V · XLR 4.0 V
Inputs: 2x coaxial (192/24); 2x optical (96/24); USB (PCM 384 kHz/32-bit, DSD 2.8/5.6 MHz)
Outputs: XLR; RCA; 6.3 mm headphone
DAC / chipset: 2x Burr-Brown PCM1795
Other: S/N 115 dB; distortion 0.0015% (1 kHz); max 13 W; 4.0 kg

^[1]

Dynaudio Contour S 3.4

Burson

Burson V5 Opamp · Discrete opamp (single / dual) · discontinued

Supply voltage: ±3.5 V to ±15 V (absolute maximum)
Gain-bandwidth product: 50 MHz (at 100 kHz)
Dual or single: dual and single
Package: 14.5 mm wide × 12.4 mm deep × 29 mm high (V5-OPA-D)

^[2]

Specs from manufacturer data unless a source below says otherwise. “calc.” values are worked out from those figures (V = √(P × R); 110 dB SPL used as a loud reference level). Gear listed without specs is not in our spec library yet.