Oguzhan Burson Conductor 3X GT with Sennheiser HD 660S

Oguzhan’s Burson Conductor 3X GT with Sennheiser HD 660S

Published on

Post Info

This product has already exceeded my expectations, and I’m excited to see how it will perform with a 5A power charger and upgraded op amps. I’m curious to hear if these enhancements will take its performance to an even higher level.

The System

Listening with

Sennheiser HD 660S · Headphones: open-back, dynamic, circumaural · discontinued
  • Impedance: 150 Ω
  • Sensitivity: 104 dB SPL @ 1 kHz, 1 V (as published) ≈ 95.8 dB/mW (calc.)
  • Frequency response: 9 Hz – 41.5 kHz (AU page); 10 Hz – 41 kHz (user manual)
  • Plugs / cables supplied: 6.35 mm unbalanced and 4.4 mm balanced cables (user manual)
  • Other: THD <=0.04% (1 kHz, 100 dB); max input 500 mW

Matching notes: At 150 Ω and 104 dB/V, the HD 660S is a high-impedance load that needs voltage more than current: about 2 V (27 mW, 13 mA) for 110 dB SPL (calc.). Burson rates the Conductor 3X GT at 1.3 W (XLR) / 0.65 W (SE) into 150 Ω, which is about 14.0 V / 9.9 V RMS (calc.), roughly 17 dB / 14 dB more than that. The Conductor 3X GT’s 0.5 Ω headphone output impedance is 1/300 of the load. [1] [2] [3] [4] [5] [6]

Burson

Burson Conductor 3X GT · DAC / headphone amplifier / preamp · discontinued
  • Output power (XLR / SE): 16 Ω 10 W / 5 W · 32 Ω 8 W / 4 W · 100 Ω 3.8 W / 1.9 W · 150 Ω 1.3 W / 0.65 W · 300 Ω 0.64 W / 0.32 W
  • Output impedance: 0.5 Ω (headphone); 1 Ω (pre out); 25 Ω (DAC out)
  • Output voltage: RCA 2 V (DAC out)
  • Gain: High / Low; dB not published
  • Inputs: 2x XLR; 2x RCA; USB (XMOS; PCM to 768 kHz/32-bit, native DSD512); Toslink; coaxial (24/192); Bluetooth 5.0 aptX HD; microphone
  • Input impedance: 40 kΩ
  • Input sensitivity: line level
  • Outputs: XLR/RCA pre / DAC out; subwoofer pre out; 6.35 mm + 4-pin XLR headphone
  • DAC / chipset: 2x ESS ES9038 (suffix not stated)
  • Other: Model R-181X (“GT3”); THD <0.0015%; FR ±1 dB 0-58 kHz; 24V/5A PSU

[4] [5] [6]

Also in the system

KEF LS50 Wireless II · Speakers: active wireless bookshelf, two-way (Uni-Q), Class D LF / Class AB HF
  • Frequency response: 45 Hz – 28 kHz (±3 dB, EQ-dependent)
  • Connectors: HDMI eARC; optical; coaxial; analogue; Ethernet; Wi-Fi; Bluetooth (primary speaker)
  • Other: max SPL 108 dB

[7]

Specs from manufacturer data unless a source below says otherwise. “calc.” values are worked out from those figures (V = √(P × R); 110 dB SPL used as a loud reference level). Gear listed without specs is not in our spec library yet.

  1. Sennheiser HD 660S: sennheiser-hearing.com
  2. Sennheiser HD 660S: us.sennheiser-hearing.com
  3. Sennheiser HD 660S: PDF (gzhls.at)
  4. Burson Conductor 3X GT product page (conductor-3x-gt page, archived 2022)
  5. Burson Conductor 3X GT User Manual (Burson downloads)
  6. Burson Conductor 3X GT product page (conductor-gt4 page)
  7. KEF LS50 Wireless II: us.kef.com