Magazine-style cover for the HD Audio video review of the Burson V7 Vivid, showing an open AIYIMA T20 tube preamp and D20 DAC on a wooden table with the V7 Vivid box beside them, and the HD Audio channel logo

Burson V7 Vivid Video Review by HD Audio: A Three-Way Listening Test

Published on

Post Info

HD Audio, a shop channel in Hanoi, has posted a Vietnamese video of a three-way listening test: the AIYIMA D20 DAC on its own, then through a stock AIYIMA T20 tube preamp, and then through the same T20 with a Burson V7 Vivid fitted. The presenter does not give a verdict. He plays the same track in each setup and asks viewers to judge for themselves. The video is in Vietnamese; the quotes below are our own translations of the auto-captions, and each is marked as such.

Watch: HD Audio tests the V7 Vivid

A regular customer from Dong Nai had already fitted a V7 Vivid in a T20, and that is what prompted the test. HD Audio then walks through three configurations, using the same music and leaving the power amplifier unchanged:

  • The AIYIMA D20 DAC connected directly, with no tube preamp in the path.
  • The D20 feeding the stock AIYIMA T20 tube preamp, which uses ECC83 tubes.
  • The same T20 after a V7 Vivid is fitted in one of its op amp sockets.

“First I’ll test the D20 on its own. Then I’ll test it through the preamp, to hear what difference the preamp makes. And finally, how it sounds once the preamp has been upgraded with the V7 Vivid.” (translated from Vietnamese)

What he says about the V7 Vivid

Before the swap, he places the V7 Vivid among the op amps he considers the best available now:

“The V7 Vivid or the V7 Classic, or the Sparkos Labs SS3602. Those are among the very best opamps in the world right now.” (translated from Vietnamese)

He also adds: “Many players praise them a lot.” (translated from Vietnamese)

Fitting the V7 Vivid

He unplugs the T20 before the swap and reminds viewers to do the same. He also stresses measuring the supply at the socket first, because an op amp can physically fit even when the voltage is not right. After measuring, he said the T20’s supply was a good match for the V7 Vivid. Alignment matters too: the notched face of the V7 should line up with the round hole on the socket.

The T20 has three op amp sockets. For this test he fitted a single V7 Vivid and left the tubes as they were. He notes that doing all three sockets would be a much larger upgrade, and that you should check whether the supply can feed that many op amps. The preamp needs about 30 seconds to start up before he repeats the same track.

He leaves the verdict to you

After the third listen, he still does not pick a winner: “After listening to the op amp upgrade, the stock preamp, and the DAC on its own, tell me what you think in the comments and we can discuss it together.” (translated from Vietnamese)

The video description makes the same invitation: “Follow the practical test and listen so you can form your own impression.” (translated from Vietnamese)

Thank you, HD Audio, for a careful, no-pressure listening comparison.

Discover the full features and specifications on the Burson Supreme Sound Opamp V7 Pro product page.