Barry Burson V5i Opamp with ASUS Xonar Essence STX II

Barry’s Burson V5i Opamp with ASUS Xonar Essence STX II

Published on

Post Info

Using 2x V5i opamps in my Xonar Essence STX II. I upgraded from genuine LME49990 dual-mono opamps. The V5i is excellent for the card’s Dolby Headphone feature. The opamps’ midrange focus and increased detail are awesome for movies and create a very nice focused centre image for dialogue. The V5i definitely have a colour to them, with some taming of the bass and treble, so for music, I would not want them as my only source. But for occasional use, the midrange can be quite addictive for music, too.

The System

Listening with

ASUS Xonar Essence STX II · Sound card: PCIe sound card with headphone amp · discontinued
  • Frequency response: 10 Hz – 90 kHz (-3 dB, 16-bit/44.1 kHz input)
  • Output impedance: not published
  • Output voltage: RCA 2 Vrms (line out, RCA/3.5)
  • Gain: not published
  • Inputs: 1x 6.3 mm line/mic in
  • Outputs: 1x 6.3 mm headphone (7 Vrms); 2x RCA; S/PDIF coax out
  • DAC / chipset: TI Burr-Brown PCM1792A; ASUS AV100 processor (192 kHz/24-bit)
  • Other: headphone output 7 Vrms; SNR (A) 124 dB front / 120 dB headphone; THD+N 0.0003% (front) / 0.001% (headphone); swappable opamps

[1]

Burson

Burson V5i Opamp · Discrete opamp (single / dual) · current
  • Supply voltage: ±5 V / 10 VDC to ±16 V / 32 VDC (absolute maximum)
  • Gain-bandwidth product: 50 MHz (at 100 kHz)
  • Dual or single: dual and single
  • Package: 11 mm wide × 11 mm deep × 7.3 mm high

[2] [3]

Also in the system

LME49990

Specs from manufacturer data unless a source below says otherwise. “calc.” values are worked out from those figures (V = √(P × R); 110 dB SPL used as a loud reference level). Gear listed without specs is not in our spec library yet.

  1. ASUS Xonar Essence STX II: archived page (web.archive.org)
  2. Burson V5i Opamp datasheet V1.0
  3. Burson V5i Opamp product page