Mark’s Burson Funk with Audioengine HDP6 and Audio-Technica ATH-M50x

Published on

Sales Burson
February 3, 2023

Post Info

Feedbacks - Funk
Audio-Technica ATH-M50x, Audioengine HDP6, Burson Funk, This is my bedroom set up. A passive switchbox-Solupeak/ tuner-Bogen DST1/cd player-Jolida JD200 tube

Excellent amp. Voices are very clear and natural whether singing or speaking. The amp is very well balanced between the bass, midrange, and treble. Because of the low noise floor it’s easy to listen at higher volumes, However, listening at quiet levels still reveals tons of detail. I mostly listen through speakers, but the headphone amp is excellent too.

The System

Listening with

Audioengine HDP6

Audio-Technica ATH-M50x · Headphones: closed-back, dynamic, circumaural

Impedance: 38 Ω
Sensitivity: 99 dB (reference not stated on page; A-T M-series)
Frequency response: 15 Hz – 28 kHz
Plugs / cables supplied: detachable cables (coiled/straight); 3.5 mm plug
Other: 45 mm driver; max input 1,600 mW @ 1 kHz

^[1]

Burson

Burson Funk · Headphone amplifier / integrated amplifier

Output power (headphone): 16 Ω 3.5 W · 32 Ω 2.5 W · 100 Ω 0.6 W · 150 Ω 0.4 W · 300 Ω 0.15 W
Power: 8 Ω: 35 W · 4 Ω: 45 W
Output impedance: <2 Ω (headphone)
Gain: not published
Inputs: RCA L/R
Input impedance: 38 kΩ
Outputs: headphone (SE); speaker terminals
Other: Model P-300; THD <0.03%; FR ±1 dB 0-35 kHz; speaker S/N 92.5 dB

^{[2] [3] [4]}

Also in the system

This is my bedroom set up. A passive switchbox-Solupeak/ tuner-Bogen DST1/cd player-Jolida JD200 tube

Specs from manufacturer data unless a source below says otherwise. “calc.” values are worked out from those figures (V = √(P × R); 110 dB SPL used as a loud reference level). Gear listed without specs is not in our spec library yet.