Ruud’s Burson V5 Opamp with Audyn Pre-6 preamplifier

Published on

Post Info

The Audyn Pre-6 NE5534 output drivers are changes to Burson V5SS single opamps (6 pcs). With a verry good soundstage as result.

The System

Listening with

Audyn Pre-6 preamplifier

Burson

Burson V5 Opamp · Discrete opamp (single / dual) · discontinued
  • Supply voltage: ±3.5 V to ±15 V (absolute maximum)
  • Gain-bandwidth product: 50 MHz (at 100 kHz)
  • Dual or single: dual and single
  • Package: 14.5 mm wide × 12.4 mm deep × 29 mm high (V5-OPA-D)

[1]

Also in the system

NE5534 · Operational amplifier
  • Operating voltage: ±5 V to ±15 V (recommended)
  • Supply voltage: ±22 V (absolute maximum)
  • Unity-gain bandwidth: 10 MHz typ
  • Dual or single: single
  • Package: SOIC-8; PDIP-8

[2]

Specs from manufacturer data unless a source below says otherwise. “calc.” values are worked out from those figures (V = √(P × R); 110 dB SPL used as a loud reference level). Gear listed without specs is not in our spec library yet.

  1. Burson V5 Opamp datasheet V1.1
  2. NE5534: PDF (ti.com)