Roman’s Burson V5i Opamp with beyerdynamic DT 880

Published on

Post Info

this is my first experience.

The System

Listening with

beyerdynamic DT 880 · Headphones: semi-open, dynamic, circumaural
  • Impedance: 250 Ω (PRO page)
  • Sensitivity: 96 dB SPL (reference not stated on page)
  • Frequency response: 5 Hz – 35 kHz
  • Plugs / cables supplied: coiled cable with 3.5 mm plug and 6.35 mm adapter (PRO)

[1]

Burson

Burson V5i Opamp · Discrete opamp (single / dual) · current
  • Supply voltage: ±5 V / 10 VDC to ±16 V / 32 VDC (absolute maximum)
  • Gain-bandwidth product: 50 MHz (at 100 kHz)
  • Dual or single: dual and single
  • Package: 11 mm wide × 11 mm deep × 7.3 mm high

[2] [3]

Specs from manufacturer data unless a source below says otherwise. “calc.” values are worked out from those figures (V = √(P × R); 110 dB SPL used as a loud reference level). Gear listed without specs is not in our spec library yet.

  1. beyerdynamic DT 880: north-america.beyerdynamic.com
  2. Burson V5i Opamp datasheet V1.0
  3. Burson V5i Opamp product page