Stuart’s Burson V6 Opamp with Burson Playmate

Published on

Post Info

Noticeable clarity & air over the basic NE5532 op-amps.

The System

Listening with

Burson Playmate · DAC / headphone amplifier / preamp · discontinued
  • Output power (headphone): 16 Ω 1.8 W · 32 Ω 2 W · 100 Ω 0.5 W · 150 Ω 0.3 W · 300 Ω 0.1 W
  • Output impedance: <2 Ω (headphone); 15 Ω (pre out)
  • Gain: not published
  • Inputs: USB (XMOS; PCM to 768 kHz/32-bit, native DSD512); Toslink
  • Input impedance: 38 kΩ
  • Outputs: RCA pre out; headphone jack (SE)
  • DAC / chipset: ESS SABRE32 ES9038 (suffix not stated)
  • Other: Original Playmate (Playmate 1); THD <0.002%; FR ±1 dB 0-35 kHz

[1]

Burson

Burson V6 Opamp · Discrete opamp (single / dual)
  • Supply voltage: ±3 V min, ±15 V typ, ±17 V max (absolute maximum ratings table)
  • Gain-bandwidth product: 52 MHz (at 100 kHz)
  • Dual or single: dual and single (quiescent current 8 mA single and 16 mA dual, at ±15 V)

[2]

Also in the system

NE5532 · Dual operational amplifier
  • Operating voltage: ±5 V to ±15 V (recommended)
  • Supply voltage: ±18 V (absolute maximum)
  • Unity-gain bandwidth: 12 MHz typ
  • Dual or single: dual
  • Package: SOIC-8; PDIP-8; SO-8

[3]

Specs from manufacturer data unless a source below says otherwise. “calc.” values are worked out from those figures (V = √(P × R); 110 dB SPL used as a loud reference level). Gear listed without specs is not in our spec library yet.

  1. Burson Playmate product page
  2. Burson Supreme Sound Opamp V6 datasheet V1.1 (SS-Opamp-V6-datasheet-V1.1.pdf)
  3. NE5532: PDF (ti.com)