Marco’s Burson V6 Vivid Opamp with Creative Sound Blaster ZxR

Published on

Post Info

a few days ago I received the package containing the upgrade of the V6 vivid op amps for the creative Zxr sound card, from the first moment I mounted the op amps on the card I felt a drop in volume in a right channel, I made several attempts to invert the 4 op amps in sequence but one op amp is weaker than the other 3 I don’t know what the problem is, I would like to ask what can be done? (I signed with the marker to recognize it). The only solution I have adopted now has been to reassemble the two lm358 op amps behind and the two V6 Vivid forward

The System

Listening with

Creative Sound Blaster ZxR · Sound card: PCIe sound card + DBpro daughterboard + Audio Control Module · discontinued
  • Output impedance: not published
  • Output voltage: RCA not published
  • Gain: not published
  • Inputs: line in 2x RCA (DBpro); Toslink in; 6.35 mm mic
  • Outputs: amplified 6.35 mm headphone; 2x RCA; 2x 3.5 mm (rear, C/sub); Toslink out
  • DAC / chipset: not published
  • Other: SNR 124 dB; Sound Core3D; up to 24-bit/192 kHz; “600 Ω headphone amplifier”; swappable op-amps

[1]

Burson

Burson V6 Vivid Opamp

Specs from manufacturer data unless a source below says otherwise. “calc.” values are worked out from those figures (V = √(P × R); 110 dB SPL used as a loud reference level). Gear listed without specs is not in our spec library yet.

  1. Creative Sound Blaster ZxR: archived page (web.archive.org)