Robert’s Burson Conductor with Dan Clark Audio ETHER CX

Published on

Post Info

Installed Super Charger 3A with good results.

The System

Listening with

Dan Clark Audio ETHER CX

Burson

Burson Conductor
Burson Conductor 3X Reference · DAC / headphone amplifier / preamp · discontinued
  • Output power (XLR / SE): 16 Ω 7.5 W / 3.75 W · 32 Ω 5 W / 2.5 W · 100 Ω 1.75 W / 0.88 W · 150 Ω 1.16 W / 0.58 W · 300 Ω 0.58 W / 0.3 W
  • Output impedance: 0.5 Ω (headphone); 1 Ω (pre out); 25 Ω (DAC out)
  • Output voltage: RCA 2 V (DAC out)
  • Gain: High / Low; dB not published
  • Inputs: 2x XLR; USB (XMOS; PCM to 768 kHz/32-bit, native DSD512); Toslink; coaxial; Bluetooth 5.0 aptX HD; microphone
  • Input impedance: 40 kΩ
  • Input sensitivity: line level
  • Outputs: XLR pre out; line-level DAC out; 6.35 mm + 4-pin XLR headphone
  • DAC / chipset: 2x ESS ES9038Q2M
  • Other: Model R180X (3XR); THD <0.0015%; FR ±1 dB 0-58 kHz

[1] [2] [3]

Specs from manufacturer data unless a source below says otherwise. “calc.” values are worked out from those figures (V = √(P × R); 110 dB SPL used as a loud reference level). Gear listed without specs is not in our spec library yet.

  1. Burson Conductor 3X Reference product page (conductor-3x page, archived 2019)
  2. Burson Conductor 3X Reference product page (conductor-3-performance page, archived 2020)
  3. Burson Conductor 3X References User Manual V1.6 (Burson downloads)