Kyle Burson Conductor 3X GT with Dan Clark Audio EXPANSE

Kyle’s Burson Conductor 3X GT with Dan Clark Audio EXPANSE

Published on

Post Info

Simply out of this world…….

The System

Listening with

Dan Clark Audio EXPANSE · Headphones: open-back, planar magnetic, circumaural
  • Impedance: 26 Ω
  • Sensitivity: ~90 dB/mW
  • Frequency response: not published (page states “Yes, it has one”)
  • Plugs / cables supplied: VIVO cable
  • Other: 418 g; THD <0.1% ref 80 dB

[1]

Burson

Burson Conductor 3X GT · DAC / headphone amplifier / preamp · discontinued
  • Output power (XLR / SE): 16 Ω 10 W / 5 W · 32 Ω 8 W / 4 W · 100 Ω 3.8 W / 1.9 W · 150 Ω 1.3 W / 0.65 W · 300 Ω 0.64 W / 0.32 W
  • Output impedance: 0.5 Ω (headphone); 1 Ω (pre out); 25 Ω (DAC out)
  • Output voltage: RCA 2 V (DAC out)
  • Gain: High / Low; dB not published
  • Inputs: 2x XLR; 2x RCA; USB (XMOS; PCM to 768 kHz/32-bit, native DSD512); Toslink; coaxial (24/192); Bluetooth 5.0 aptX HD; microphone
  • Input impedance: 40 kΩ
  • Input sensitivity: line level
  • Outputs: XLR/RCA pre / DAC out; subwoofer pre out; 6.35 mm + 4-pin XLR headphone
  • DAC / chipset: 2x ESS ES9038 (suffix not stated)
  • Other: Model R-181X (“GT3”); THD <0.0015%; FR ±1 dB 0-58 kHz; 24V/5A PSU

[2] [3] [4]

Also in the system

Schiit Jotunheim · Headphone amp: balanced / SE headphone amp + preamp (optional DAC or phono card, original version) · discontinued
  • Frequency response: 20 Hz – 20 kHz (-0.1 dB); 2 Hz – 700 kHz (-3 dB)
  • Output power (XLR / SE): 32 Ω 5 W / 1.5 W · 300 Ω 0.9 W / 0.35 W
  • Output impedance: <0.1 Ω
  • Gain: 2 (6 dB) / 8 (14 dB)
  • Inputs: balanced XLR; SE RCA; internal card (DAC or MM phono: 42 dB, 47k / 100 pF)
  • Outputs: 4-pin XLR balanced headphone; 6.35 mm SE; balanced + SE preamp out
  • DAC / chipset: optional card (AKM AK4490 or multibit), not standard
  • Other: THD <0.001% (1 V); IMD <0.0015%; SNR >109 dB (A, ref 1 V); 25 W

[5]

Specs from manufacturer data unless a source below says otherwise. “calc.” values are worked out from those figures (V = √(P × R); 110 dB SPL used as a loud reference level). Gear listed without specs is not in our spec library yet.

  1. Dan Clark Audio EXPANSE: danclarkaudio.com
  2. Burson Conductor 3X GT product page (conductor-3x-gt page, archived 2022)
  3. Burson Conductor 3X GT User Manual (Burson downloads)
  4. Burson Conductor 3X GT product page (conductor-gt4 page)
  5. Schiit Jotunheim: PDF (schiit.com)