Ton’s Burson V5i Opamp with DIY phono stage based on AD797 and AD8065

Published on

Sales Burson
February 26, 2020

Post Info

Feedbacks - V5i SS Opamp
ClearlightAudio Recovery turntable with Breuer 8C arm and Kiseki Agaat cartridge, CloneNote passive preamp, Quicksilver M80 monoblocs and ClearlightAudio Diamond speakers.

Easy to make the switch, Have put in a .1µF ceramic cap over pins 4 and 7. Overall result a lot of improvement overall. Most notable midrange and frequency extension. I love how those things do voices.

The System

Listening with

DIY phono stage based on AD797

AD8065

Burson

Burson V5i Opamp · Discrete opamp (single / dual) · current

Supply voltage: ±5 V / 10 VDC to ±16 V / 32 VDC (absolute maximum)
Gain-bandwidth product: 50 MHz (at 100 kHz)
Dual or single: dual and single
Package: 11 mm wide × 11 mm deep × 7.3 mm high

^{[1] [2]}

Also in the system

Analog Devices AD797 · Operational amplifier

Operating voltage: ±5 V to ±18 V
Supply voltage: ±18 V (absolute maximum)
Gain-bandwidth product: 110 MHz (at G = 1000)
Dual or single: single
Package: 8-lead PDIP; 8-lead SOIC

^[3]

AD8065

Specs from manufacturer data unless a source below says otherwise. “calc.” values are worked out from those figures (V = √(P × R); 110 dB SPL used as a loud reference level). Gear listed without specs is not in our spec library yet.