Thomas’s Burson Conductor 3 with Electrocompaniet Tana and Denon AH-D9200

Published on

Sales Burson
March 25, 2024

Post Info

Feedbacks - Conductor 3R | 3XR
Denon AH-D9200, Denon AH-MM 400, Denon DAT, Einstein, Electrocompaniet CD EMC 1, Electrocompaniet Tana, Nakamichi RX 303E, Perpetuum Ebner, Pioneer DAT

Heard it at Klubben Germany Retailer 1st…amazing sound…pure, wide and as I believe a perfect match with with my Denon AH-9200. Great design and superb technology

The System

Listening with

Electrocompaniet Tana

Denon AH-D9200 · Headphones: closed-back, dynamic (50 mm nanofiber FreeEdge), circumaural

Impedance: 24 Ω
Sensitivity: 105 dB/mW ≈ 121.2 dB/V (calc.)
Frequency response: 5 Hz – 56 kHz
Plugs / cables supplied: not published on spec page
Other: max power input 1,800 mW; bamboo housing

^[1]

Denon AH-MM 400

Burson

Burson Conductor 3 · DAC / headphone amplifier / preamp family (Conductor 3 Performance / 3 Reference) · discontinued

Output impedance: 1 Ω (pre out); 25 Ω (DAC out); headphone 0.5 Ω (3R) / 0.6 Ω (3P)
Output voltage: RCA 2 V (DAC out)
Gain: High / Low (3P); High / Medium / Low (3R); dB not published
Inputs: USB (XMOS; PCM to 768 kHz/32-bit, native DSD512); Toslink; Bluetooth 5.0 aptX HD; microphone (3R adds 2x RCA analogue in + coaxial)
Outputs: RCA pre out; RCA DAC out; 6.35 mm headphone (SE only)
DAC / chipset: ESS ES9038Q2M (1x in 3P, 2x in 3R)
Other: 3P (M180): 4 W @16 Ω, 2 W @32, 0.64 W @100, 0.16 W @300; 1x ES9038Q2M; THD <0.0017%. 3R (R180): 7.5 W @16, 5 W @32, 1.75 W @100, 0.58 W @300; 2x ES9038Q2M; THD <0.0015%. Both FR ±1 dB 0-58 kHz.

^{[2] [3] [4]}

Also in the system

Denon DAT

Einstein

Electrocompaniet CD EMC 1

Nakamichi RX 303E

Perpetuum Ebner

Pioneer DAT

Specs from manufacturer data unless a source below says otherwise. “calc.” values are worked out from those figures (V = √(P × R); 110 dB SPL used as a loud reference level). Gear listed without specs is not in our spec library yet.