Michael’s Burson Soloist Voyager with Falcon Acoustics LS3 5A

Published on

Sales Burson
June 3, 2024

Post Info

Feedbacks - Soloist Prime | Voyager
Burson Soloist Voyager, Dan Clark Audio E3, Falcon Acoustics LS3 5A, HiFiMAN HE1000se, T+A A200, T+A DAC200, Technics 1200GL, ZMF Verite

Very pleased with the Voyager. Great Pre-Amp &; headphone Amp.

The System

Listening with

Falcon Acoustics LS3 5A

HiFiMAN HE1000se · Headphones: open-back, planar magnetic, circumaural

Impedance: 35 Ω
Sensitivity: 96 dB (reference not stated by HiFiMAN)
Frequency response: 8 Hz – 65 kHz
Plugs / cables supplied: not published (HiFiMAN spec page lists no connector)
Other: weight 440 g

^[1]

Dan Clark Audio E3 · Headphones: closed-back, planar magnetic, circumaural

Impedance: 27 Ω
Sensitivity: ~90 dB/mW
Frequency response: not published (page states “Yes, it has one”)
Plugs / cables supplied: not published
Other: 455 g

^[2]

ZMF Verite Open · Headphones: open-back, dynamic (vapor-deposited beryllium), circumaural

Impedance: 300 Ω
Sensitivity: ~97 dB/mW (approx., “~” as published)
Frequency response: not published
Plugs / cables supplied: not published (ZMF lists no connector type)

^{[3] [4]}

Burson

Burson Soloist Voyager · Headphone amplifier / preamp (Class-A)

Output power (XLR / SE): 16 Ω 10 W / 5 W · 32 Ω 8 W / 4 W · 100 Ω 3.8 W / 1.9 W · 150 Ω 1.3 W / 0.65 W · 300 Ω 0.64 W / 0.32 W
Output impedance: 0.5 Ω (headphone); 25 Ω (pre out)
Gain: 3 levels: High full power (XLR 10 W / SE 5 W), Medium 50%, Low 10% (IEM); dB not published
Inputs: 2x XLR; 2x RCA; mic bypass
Input impedance: 38 kΩ
Input sensitivity: RCA 2 V; XLR 4 V+ (line level)
Outputs: XLR + SE headphone; XLR + RCA pre out; RCA subwoofer out
Other: THD <0.0015%; FR ±1 dB 0-48 kHz; Standard/Deluxe: 24V5A PSU or Super Charger 5A, V6 Vivid or V7 Vivid Pro; SP02 installed

^{[5] [6]}

Also in the system

T+A A200

T+A DAC200

Technics 1200GL

Specs from manufacturer data unless a source below says otherwise. “calc.” values are worked out from those figures (V = √(P × R); 110 dB SPL used as a loud reference level). Gear listed without specs is not in our spec library yet.