Gary’s Burson Conductor 3X GT with Focal Clear MG

Published on

Sales Burson
April 3, 2024

Post Info

Feedbacks - Conductor GT3 | GT4
Burson Conductor 3X GT, Focal Clear MG

Excellent my only issue is it won’t accept lightning from older ipads

The System

Listening with

Focal Clear MG · Headphones: open-back, dynamic (40 mm Mg M-dome), circumaural

Impedance: 55 Ω
Sensitivity: 104 dB SPL / 1 mW @ 1 kHz ≈ 116.6 dB/V (calc.)
Frequency response: 5 Hz – 28 kHz
Plugs / cables supplied: 3.5 mm cable (1.2 m) with 6.35 mm adapter; 4-pin XLR cable (3 m); cup sockets 3.5 mm

Matching notes: At 55 Ω and 104 dB/mW, the Focal Clear MG is a low-impedance load, and an efficient one: about 0.47 V (4 mW, 8.5 mA) for 110 dB SPL (calc.). Burson does not publish a 55 Ω rating for the Conductor 3X GT. Its 32 Ω and 100 Ω ratings (8 W XLR / 4 W SE; 3.8 W XLR / 1.9 W SE) fall either side of it. The Conductor 3X GT’s 0.5 Ω headphone output impedance is 1/110 of the load. ^{[1] [2] [3] [4] [5]}

Burson

Burson Conductor 3X GT · DAC / headphone amplifier / preamp · discontinued

Output power (XLR / SE): 16 Ω 10 W / 5 W · 32 Ω 8 W / 4 W · 100 Ω 3.8 W / 1.9 W · 150 Ω 1.3 W / 0.65 W · 300 Ω 0.64 W / 0.32 W
Output impedance: 0.5 Ω (headphone); 1 Ω (pre out); 25 Ω (DAC out)
Output voltage: RCA 2 V (DAC out)
Gain: High / Low; dB not published
Inputs: 2x XLR; 2x RCA; USB (XMOS; PCM to 768 kHz/32-bit, native DSD512); Toslink; coaxial (24/192); Bluetooth 5.0 aptX HD; microphone
Input impedance: 40 kΩ
Input sensitivity: line level
Outputs: XLR/RCA pre / DAC out; subwoofer pre out; 6.35 mm + 4-pin XLR headphone
DAC / chipset: 2x ESS ES9038 (suffix not stated)
Other: Model R-181X (“GT3”); THD <0.0015%; FR ±1 dB 0-58 kHz; 24V/5A PSU

^{[3] [4] [5]}

Specs from manufacturer data unless a source below says otherwise. “calc.” values are worked out from those figures (V = √(P × R); 110 dB SPL used as a loud reference level). Gear listed without specs is not in our spec library yet.