Jodie’s Burson Playmate 2 with Focal Elear

Published on

Sales Burson
April 16, 2021

Post Info

Feedbacks - Playmate 02 | 03
Burson Playmate 2, Focal Elear

New to the brand, still evaluating the product.

The System

Listening with

Focal Elear · Headphones: open-back, dynamic (40 mm Al/Mg M-dome), circumaural · discontinued

Impedance: 80 Ω
Sensitivity: 104 dB SPL / 1 mW @ 1 kHz ≈ 115.0 dB/V (calc.)
Frequency response: 5 Hz – 23 kHz
Plugs / cables supplied: 6.35 mm cable (3 m); 3.5 mm jacks at the cups
Other: THD <0.3% @ 1 kHz / 100 dB SPL

Matching notes: At 80 Ω and 104 dB/mW, the Focal Elear is a low-impedance load, and an efficient one: about 0.56 V (4 mW, 7.1 mA) for 110 dB SPL (calc.). Burson does not publish a 80 Ω rating for the Playmate 2. Its 32 Ω and 100 Ω ratings (2.5 W SE; 0.6 W SE) fall either side of it. The Playmate 2’s under 2 Ω headphone output impedance is less than 1/40 of the load. ^{[1] [2] [3] [4]}

Burson

Burson Playmate 2 · DAC / headphone amplifier / preamp · discontinued

Output power (headphone): 16 Ω 3.5 W · 32 Ω 2.5 W · 100 Ω 0.6 W · 150 Ω 0.4 W · 300 Ω 0.15 W
Output impedance: <2 Ω (headphone); 15 Ω (pre out)
Output voltage: RCA not published
Gain: High / Low; dB not published
Inputs: USB (XMOS; PCM to 768 kHz/32-bit, native DSD512); Toslink
Input impedance: 38 kΩ
Outputs: RCA pre out; headphone jack (SE)
DAC / chipset: ESS SABRE32 ES9038Q2M
Other: Model P171; SE only; THD <0.002%; FR ±1 dB 0-35 kHz; DAC THD+N 0.0018%

^{[3] [4]}

Specs from manufacturer data unless a source below says otherwise. “calc.” values are worked out from those figures (V = √(P × R); 110 dB SPL used as a loud reference level). Gear listed without specs is not in our spec library yet.