Vincent’s Burson V7 Opamp with Fosi Audio BT20A Pro

Published on

Post Info

They sound wonderful, the soundstage is much wider and the bass reaches down further. Awesome!

The System

Listening with

Fosi Audio BT20A Pro · Power amp: Bluetooth Class-D stereo amplifier
  • Frequency response: 20 Hz – 20 kHz (±1.2 dB)
  • Power: 4 Ω: 300 x 2
  • Inputs: RCA; Bluetooth
  • Outputs: speaker; 3.5 mm pre out
  • Other: Max power 300 W x 2 at 4 Ω; load 2-8 Ω; THD 0.005%; SNR >=108 dB; TI TPA3255; DC 24-48 V; stock opamps NE5532

[1]

Burson

Burson V7 Opamp · Discrete opamp (single / dual)
  • Supply voltage: ±4 V min, ±15 V typ, ±16 V max (absolute maximum ratings table)
  • Gain-bandwidth product: 55 MHz (at 100 kHz)
  • Dual or single: dual and single (quiescent current 10 mA single and 20 mA dual, at ±15 V)
  • Package: 15.4 mm wide × 13.4 mm deep × 20 mm high; DIP8 connection (user manual)

[2]

Specs from manufacturer data unless a source below says otherwise. “calc.” values are worked out from those figures (V = √(P × R); 110 dB SPL used as a loud reference level). Gear listed without specs is not in our spec library yet.

  1. Fosi Audio BT20A Pro: fosiaudio.com
  2. Burson Supreme Sound Opamp V7 datasheet V1 (SS-Opamp-V7-datasheet-V1.pdf)