Hans Burson V5 Opamp with Sennheiser HD 650 and Martin Logan speakers

Hans’s Burson V5 Opamp with Sennheiser HD 650 and Martin Logan speakers

Published on

Post Info

Absolutely love them. Can’t live with out them!

The System

Listening with

Sennheiser HD 650 · Headphones: open-back, dynamic, circumaural
  • Impedance: 300 Ω
  • Sensitivity: 103 dB SPL @ 1 kHz, 1 V (as published) ≈ 97.8 dB/mW (calc.)
  • Frequency response: 10 Hz – 41 kHz
  • Plugs / cables supplied: 6.35 mm stereo jack plug (3.5 mm adapter)
  • Other: THD <0.05% (1 kHz, 1 V); 42 mm transducer

[1] [2]

Martin Logan speakers

Burson

Burson V5 Opamp · Discrete opamp (single / dual) · discontinued
  • Supply voltage: ±3.5 V to ±15 V (absolute maximum)
  • Gain-bandwidth product: 50 MHz (at 100 kHz)
  • Dual or single: dual and single
  • Package: 14.5 mm wide × 12.4 mm deep × 29 mm high (V5-OPA-D)

[3]

Specs from manufacturer data unless a source below says otherwise. “calc.” values are worked out from those figures (V = √(P × R); 110 dB SPL used as a loud reference level). Gear listed without specs is not in our spec library yet.

  1. Sennheiser HD 650: us.sennheiser-hearing.com
  2. Sennheiser HD 650: support.sennheiser-hearing.com
  3. Burson V5 Opamp datasheet V1.1