Excellent, I upgraded to Soloist 3XGT after using the Soloist 3XP and everything is better
The System
Listening with
HEDD Type 07
HiFiMAN Arya · Headphones: open-back, planar magnetic, circumaural · discontinued
- Impedance: 35 Ω
- Sensitivity: 90 dB (reference not stated by HiFiMAN)
- Frequency response: 8 Hz – 65 kHz
- Plugs / cables supplied: not published (HiFiMAN spec page lists no connector)
- Other: weight 404 g
Chord Hugo TT 2 · DAC / headphone amp: FPGA DAC / preamp / headphone amp (98,304-tap WTA filter)
- Output power (XLR / SE): 8 Ω 18 W / 7.3 W · 300 Ω 1.15 W / 0.288 W
- Output impedance: 0.042 Ω
- Output voltage: XLR 9 V (300 Ω, max)
- Gain: High / low gain modes
- Inputs: USB-B; 2x coax BNC; 2x optical; Bluetooth aptX
- Outputs: XLR; RCA; 2x 6.35 mm + 1x 3.5 mm headphone; 2x DX BNC (M Scaler link)
- DAC / chipset: Chord custom FPGA (Xilinx Artix-7), WTA filter
- Other: PCM 44.1-768 kHz, DSD64-512 (DoP); dynamic range 127 dB (A); noise 1.7-4 µV (A); THD 0.00008% @ 2.5 V 300 Ω; powers 8 Ω speakers (7.3 W SE / 18 W bal); 2.53 kg
Burson
Burson Soloist 3X GT · Headphone amplifier / preamp (Class-A) · discontinued
- Output power (XLR / SE): 16 Ω 10 W / 5 W · 32 Ω 8 W / 4 W · 100 Ω 3.8 W / 1.9 W · 300 Ω 1.3 W / 0.65 W · 600 Ω 0.64 W / 0.32 W
- Output impedance: 0.5 Ω (headphone); 25 Ω (pre out)
- Gain: High / Medium / Low; dB not published
- Inputs: 2x XLR; 2x RCA; mic bypass
- Input impedance: 35 kΩ
- Input sensitivity: line level
- Outputs: XLR + RCA pre out; RCA subwoofer out; 4-pin XLR + SE headphone
- Other: Model R-120X (“GT3”); THD <0.0015%; FR ±1 dB 0-48 kHz
Specs from manufacturer data unless a source below says otherwise. “calc.” values are worked out from those figures (V = √(P × R); 110 dB SPL used as a loud reference level). Gear listed without specs is not in our spec library yet.
