Joseph’s Burson Super Charger 5A with HiFiMAN Arya and Focal Clear

Published on

Post Info

  • Feedbacks - Super Charger 3A | 5A
  • Burson 3XGT Schiit Yggdrasil, Burson Super Charger 5A, Focal Clear, HiFiMAN Arya, Sennheiser HD 6XX, Sonore Optical Rendu, Topping D90SE

Dong great, inserted in system 45 days ago, working perfectly

The System

Listening with

HiFiMAN Arya · Headphones: open-back, planar magnetic, circumaural · discontinued
  • Impedance: 35 Ω
  • Sensitivity: 90 dB (reference not stated by HiFiMAN)
  • Frequency response: 8 Hz – 65 kHz
  • Plugs / cables supplied: not published (HiFiMAN spec page lists no connector)
  • Other: weight 404 g

[1]

Focal Clear · Headphones: open-back, dynamic (40 mm Al/Mg M-dome), circumaural · discontinued
  • Impedance: 55 Ω
  • Sensitivity: 104 dB SPL / 1 mW @ 1 kHz ≈ 116.6 dB/V (calc.)
  • Frequency response: 5 Hz – 28 kHz
  • Plugs / cables supplied: 4-pin XLR; 6.35 mm; 3.5 mm cables supplied

[2] [3] [4]

Sennheiser HD 6XX · Headphones: open-back, dynamic, circumaural
  • Impedance: 300 Ω
  • Sensitivity: 103 dB SPL @ 1 kHz, 1 V (as published) ≈ 97.8 dB/mW (calc.)
  • Frequency response: 10 Hz – 41 kHz
  • Plugs / cables supplied: 3.5 mm stereo jack plug (6.35 mm adapter); 1.8 m cable
  • Other: THD <0.1% (1 kHz, 1 V)

[5] [6]

Audeze LCD-X · Headphones: open-back, planar magnetic, circumaural
  • Impedance: 20 Ω
  • Sensitivity: 103 dB/1mW (at Drum Reference Point) ≈ 120.0 dB/V (calc.)
  • Frequency response: 10 Hz – 50 kHz
  • Plugs / cables supplied: braided 4-pin XLR combo cable with 6.35 mm single-ended adapter
  • Other: recommended power >250 mW (min >100 mW; max 5 W RMS); 106 mm driver; max SPL >130 dB

[7]

Burson

Burson Super Charger 5A · Power supply (24 V DC)
  • Other: 24 V / 5 A; noise floor <1 µV; 2.5 mm barrel plug, centre positive

[8]

Burson 3XGT Schiit Yggdrasil

Also in the system

Sonore Optical Rendu
Topping D90SE · DAC: balanced desktop DAC (ES9038PRO, MQA, Bluetooth 5.0) · discontinued
  • Frequency response: 20 Hz – 40 kHz (±0.3 dB)
  • Output impedance: 100 Ω (RCA and XLR)
  • Output voltage: RCA 2.1 V (4 V mode) / 2.6 V (5 V mode) · XLR 4.2 V (4 V mode) / 5.2 V (5 V mode)
  • Inputs: USB (PCM 768 kHz/32-bit, DSD512); AES; optical; coaxial; Bluetooth (LDAC, aptX HD)
  • Outputs: XLR; RCA
  • DAC / chipset: ESS ES9038PRO; XMOS XU216; Qualcomm CSR8675
  • Other: XLR: THD+N <0.00005% @ 1 kHz, SNR / DR 134 dB; RCA: THD+N <0.00007%, SNR / DR 127 dB

[9] [10]