Radu Burson Soloist 3X GT with HiFiMAN Susvara and Abyss AB 1266 PHI

Radu’s Burson Soloist 3X GT with HiFiMAN Susvara and Abyss AB 1266 PHI

Published on

Post Info

The Soloist GT has a true flagship sound :) I am familiar with some amazing combos like Dave + Viva Egoista amp, TT2 + M-Scaler, etc and GT definitely is in the big boys’ ballpark with the sound. A bit worried about the very hot backside. I think this is the most amazing and refined all-in-one on the market, it’s driving my phones very well.

The System

Listening with

HiFiMAN Susvara · Headphones: open-back, planar magnetic, circumaural
  • Impedance: 60 Ω
  • Sensitivity: 83 dB (reference not stated by HiFiMAN)
  • Frequency response: 6 Hz – 75 kHz
  • Plugs / cables supplied: not published (HiFiMAN spec page lists no connector)
  • Other: weight 450 g

[1]

Abyss AB-1266 Phi TC · Headphones: open-back, planar magnetic, circumaural
  • Impedance: 50 Ω
  • Sensitivity: 88 dB/mW ≈ 101.0 dB/V (calc.)
  • Frequency response: 5 Hz – 45 kHz
  • Plugs / cables supplied: 2.5 m 4-pin XLR cable with 6.3 mm adaptor (JPS Labs); other terminations optional

Matching notes: At 50 Ω and 88 dB/mW, the AB-1266 Phi TC is a low-impedance load, and a fairly demanding one: about 2.8 V (158 mW, 56 mA) for 110 dB SPL (calc.). Burson does not publish a 50 Ω rating for the Soloist 3X GT. Its 32 Ω and 100 Ω ratings (8 W XLR / 4 W SE; 3.8 W XLR / 1.9 W SE) fall either side of it. The Soloist 3X GT’s 0.5 Ω headphone output impedance is 1/100 of the load. [2] [3] [4]

Grado Hemp · Headphones: open-back (open air), dynamic, on-ear
  • Impedance: 38 Ω
  • Sensitivity: not published
  • Frequency response: 13 Hz – 28 kHz
  • Plugs / cables supplied: standard plug with braided cable
  • Other: driver matching 0.05 dB

[5] [6]

Erzetich Thalia · Headphones: on-ear, open-back, dynamic (40 mm titanium-coated)
  • Impedance: 32 Ω
  • Sensitivity: not published
  • Plugs / cables supplied: detachable silver-plated OFC cable
  • Other: 280 g (current) / 270 g (original wood-and-metal version); tuned for portable sources

[7] [8]

Burson

Burson Soloist 3X GT · Headphone amplifier / preamp (Class-A) · discontinued
  • Output power (XLR / SE): 16 Ω 10 W / 5 W · 32 Ω 8 W / 4 W · 100 Ω 3.8 W / 1.9 W · 300 Ω 1.3 W / 0.65 W · 600 Ω 0.64 W / 0.32 W
  • Output impedance: 0.5 Ω (headphone); 25 Ω (pre out)
  • Gain: High / Medium / Low; dB not published
  • Inputs: 2x XLR; 2x RCA; mic bypass
  • Input impedance: 35 kΩ
  • Input sensitivity: line level
  • Outputs: XLR + RCA pre out; RCA subwoofer out; 4-pin XLR + SE headphone
  • Other: Model R-120X (“GT3”); THD <0.0015%; FR ±1 dB 0-48 kHz

[3] [4]

Burson Conductor 3 Reference · DAC / headphone amplifier / preamp · discontinued
  • Output power (headphone): 16 Ω 7.5 W · 32 Ω 5 W · 100 Ω 1.75 W · 150 Ω 1.16 W · 300 Ω 0.58 W
  • Output impedance: 0.5 Ω (headphone); 1 Ω (pre out); 25 Ω (DAC out)
  • Output voltage: RCA 2 V (DAC out)
  • Gain: High / Medium / Low; dB not published
  • Inputs: 2x RCA; USB (XMOS; PCM to 768 kHz/32-bit, native DSD512); Toslink; coaxial; Bluetooth 5.0 aptX HD; microphone
  • Input impedance: 40 kΩ
  • Input sensitivity: line level
  • Outputs: RCA pre out; RCA DAC out; 2x 6.35 mm headphone
  • DAC / chipset: 2x ESS ES9038Q2M
  • Other: Model R180 (3R); SE only; THD <0.0015%; FR ±1 dB 0-58 kHz

[9] [10] [4]