Christian’s Burson V5i Opamp with Korg HA-S

Published on

Post Info

Realy nice Upgrade to Muses01

The System

Listening with

Korg HA-S · Headphone amp: Nutube headphone amplifier kit
  • Output impedance: 10 Ω
  • Inputs: 3.5 mm
  • Outputs: 3.5 mm
  • Other: Nutube 6P1; volume and internal negative-feedback switch; 2x AA alkaline, about 9 h; recommended load 15 Ω or more; 111 x 65 x 29 mm; 110 g without batteries

[4]

Burson

Burson V5i Opamp · Discrete opamp (single / dual) · current
  • Supply voltage: ±5 V / 10 VDC to ±16 V / 32 VDC (absolute maximum)
  • Gain-bandwidth product: 50 MHz (at 100 kHz)
  • Dual or single: dual and single
  • Package: 11 mm wide × 11 mm deep × 7.3 mm high

[1] [2]

Also in the system

NJR/Nisshinbo MUSES01 · Dual operational amplifier
  • Operating voltage: ±9 V to ±16 V
  • Supply voltage: ±18 V (absolute maximum)
  • Gain-bandwidth product: 3.3 MHz typ (at 10 kHz)
  • Dual or single: dual
  • Package: DIP8

[3]

Specs from manufacturer data unless a source below says otherwise. “calc.” values are worked out from those figures (V = √(P × R); 110 dB SPL used as a loud reference level). Gear listed without specs is not in our spec library yet.

  1. Burson V5i Opamp datasheet V1.0
  2. Burson V5i Opamp product page
  3. MUSES01: PDF (nisshinbo-microdevices.co.jp)
  4. Korg HA-S: korg.com