Jacek Burson V5 Opamp with Marantz PM 7001 Amplifier

Jacek’s Burson V5 Opamp with Marantz PM 7001 Amplifier

Published on

Post Info

Good separation of sounds, space between instruments.

The System

Listening with

Marantz PM7001 · Integrated amp: stereo integrated amp with MM phono
  • Frequency response: 5 Hz – 100 kHz (±3 dB, CD, 1 W, 8 Ω)
  • Power: 8 Ω: 70 W · 4 Ω: 100 W
  • Inputs: MM phono; CD; tuner; AUX/DVD; recorder 1; recorder 2; main in
  • Input impedance: 47 kΩ (MM); 20 kΩ (line)
  • Input sensitivity: 2.5 mV (MM); 200 mV (line)
  • Outputs: speakers; pre out; headphone
  • Other: Both channels driven, 20 Hz-20 kHz; THD 0.02% (8 Ω); damping factor 100 (8 Ω); pre out 1.6 V / 560 Ω; S/N 88 dB line (IHF-A, 500 mV in)

[1]

Burson

Burson V5 Opamp · Discrete opamp (single / dual) · discontinued
  • Supply voltage: ±3.5 V to ±15 V (absolute maximum)
  • Gain-bandwidth product: 50 MHz (at 100 kHz)
  • Dual or single: dual and single
  • Package: 14.5 mm wide × 12.4 mm deep × 29 mm high (V5-OPA-D)

[1]

Specs from manufacturer data unless a source below says otherwise. “calc.” values are worked out from those figures (V = √(P × R); 110 dB SPL used as a loud reference level). Gear listed without specs is not in our spec library yet.

  1. Burson V5 Opamp datasheet V1.1
  2. Marantz PM7001: PDF (marantz.com)