Wesam’s Burson Conductor 3X Reference with beyerdynamic T1 and PSI Audio A21-M

Published on

Sales Burson
November 15, 2021

Post Info

Feedbacks - Conductor 3R | 3XR, Feedbacks - Super Charger 3A | 5A
beyerdynamic T1, Burson Conductor 3X Reference, Burson Super Charger 3A

Burson Audio Conductor Reference 3XR with Supercharger 3A connected to BeyerDynamic T1 (1st Gen) & PSI Audio A21-M Studio Monitors.

The System

Listening with

beyerdynamic T1

PSI Audio A21-M

Burson

Burson Conductor 3X Reference · DAC / headphone amplifier / preamp · discontinued

Output power (XLR / SE): 16 Ω 7.5 W / 3.75 W · 32 Ω 5 W / 2.5 W · 100 Ω 1.75 W / 0.88 W · 150 Ω 1.16 W / 0.58 W · 300 Ω 0.58 W / 0.3 W
Output impedance: 0.5 Ω (headphone); 1 Ω (pre out); 25 Ω (DAC out)
Output voltage: RCA 2 V (DAC out)
Gain: High / Low; dB not published
Inputs: 2x XLR; USB (XMOS; PCM to 768 kHz/32-bit, native DSD512); Toslink; coaxial; Bluetooth 5.0 aptX HD; microphone
Input impedance: 40 kΩ
Input sensitivity: line level
Outputs: XLR pre out; line-level DAC out; 6.35 mm + 4-pin XLR headphone
DAC / chipset: 2x ESS ES9038Q2M
Other: Model R180X (3XR); THD <0.0015%; FR ±1 dB 0-58 kHz

^{[1] [2] [3]}

Burson Super Charger 3A · Power supply (24 V DC)

Other: 24 V / 3 A; noise floor <1 µV; 2.5 mm barrel plug, centre positive; 100-240 V AC in

^{[4] [5]}

Specs from manufacturer data unless a source below says otherwise. “calc.” values are worked out from those figures (V = √(P × R); 110 dB SPL used as a loud reference level). Gear listed without specs is not in our spec library yet.