Michael’s Burson V5i Opamp with Sennheiser HD265 and Heco Music Style 900

Published on

Post Info

I replaced the 5532DD in Headphone amplifier xDuoo XD05 Basic with a Burson V5i dual. The sound has changed for the better. The stage is slightly wider and slightly higher frequencies. I checked by digitizing the phone amplifier output with different OPA and then comparing the digitization results with a blind test (abc utility in Foobar player).

The System

Listening with

Sennheiser HD265
Heco Music Style 900

Burson

Burson V5i Opamp · Discrete opamp (single / dual) · current
  • Supply voltage: ±5 V / 10 VDC to ±16 V / 32 VDC (absolute maximum)
  • Gain-bandwidth product: 50 MHz (at 100 kHz)
  • Dual or single: dual and single (this post uses the dual)
  • Package: 11 mm wide × 11 mm deep × 7.3 mm high

[1] [2]

Specs from manufacturer data unless a source below says otherwise. “calc.” values are worked out from those figures (V = √(P × R); 110 dB SPL used as a loud reference level). Gear listed without specs is not in our spec library yet.

  1. Burson V5i Opamp datasheet V1.0
  2. Burson V5i Opamp product page