So far been really good coming from a Schiit Bifrost 2 and Jotunheim 2. Primarily using this for gaming, then web browsing, and lastly music. Audio has been much better coming from motherboard audio not too long ago.
The System
Listening with
- Impedance: 300 Ω
- Sensitivity: 102 dB SPL @ 1 V ≈ 96.8 dB/mW (calc.)
- Frequency response: 4 Hz – 51 kHz
- Plugs / cables supplied: 6.35 mm unbalanced; 4.4 mm balanced
Matching notes: At 300 Ω and 102 dB/V, the HD 800 S is a high-impedance load that needs voltage more than current: about 2.5 V (21 mW, 8.4 mA) for 110 dB SPL (calc.). Burson rates the Conductor 3X Reference at 0.58 W (XLR) / 0.3 W (SE) into 300 Ω, which is about 13.2 V / 9.5 V RMS (calc.), roughly 14 dB / 12 dB more than that. The Conductor 3X Reference’s 0.5 Ω headphone output impedance is 1/600 of the load. [1] [2] [3] [4]
Burson
- Output power (XLR / SE): 16 Ω 7.5 W / 3.75 W · 32 Ω 5 W / 2.5 W · 100 Ω 1.75 W / 0.88 W · 150 Ω 1.16 W / 0.58 W · 300 Ω 0.58 W / 0.3 W
- Output impedance: 0.5 Ω (headphone); 1 Ω (pre out); 25 Ω (DAC out)
- Output voltage: RCA 2 V (DAC out)
- Gain: High / Low; dB not published
- Inputs: 2x XLR; USB (XMOS; PCM to 768 kHz/32-bit, native DSD512); Toslink; coaxial; Bluetooth 5.0 aptX HD; microphone
- Input impedance: 40 kΩ
- Input sensitivity: line level
- Outputs: XLR pre out; line-level DAC out; 6.35 mm + 4-pin XLR headphone
- DAC / chipset: 2x ESS ES9038Q2M
- Other: Model R180X (3XR); THD <0.0015%; FR ±1 dB 0-58 kHz
Specs from manufacturer data unless a source below says otherwise. “calc.” values are worked out from those figures (V = √(P × R); 110 dB SPL used as a loud reference level). Gear listed without specs is not in our spec library yet.
