Harold’s Burson V5 Opamp with Creative Sound Blaster ZxR

Published on

Sales Burson
September 28, 2023

Post Info

Feedbacks - V5 SS Opamp

had to get some extended 8pin sockets to clear the capacitors, all said and done within 5min, running great, sounds great. first test run, everything flat, sbx off, very impressive, tunning just a bit, outstanding, can’t wait to get the v6v or v6c setup for my other zxr card. [Order #[removed]] (01/09/2023).. tell Dennis thanks a bunch

The System

Listening with

Creative Sound Blaster ZxR · Sound card: PCIe sound card + DBpro daughterboard + Audio Control Module · discontinued

Output impedance: not published
Output voltage: RCA not published
Gain: not published
Inputs: line in 2x RCA (DBpro); Toslink in; 6.35 mm mic
Outputs: amplified 6.35 mm headphone; 2x RCA; 2x 3.5 mm (rear, C/sub); Toslink out
DAC / chipset: not published
Other: SNR 124 dB; Sound Core3D; up to 24-bit/192 kHz; “600 Ω headphone amplifier”; swappable op-amps

^[1]

Burson

Burson V5 Opamp · Discrete opamp (single / dual) · discontinued

Supply voltage: ±3.5 V to ±15 V (absolute maximum)
Gain-bandwidth product: 50 MHz (at 100 kHz)
Dual or single: dual and single
Package: 14.5 mm wide × 12.4 mm deep × 29 mm high (V5-OPA-D)

^[2]

Specs from manufacturer data unless a source below says otherwise. “calc.” values are worked out from those figures (V = √(P × R); 110 dB SPL used as a loud reference level). Gear listed without specs is not in our spec library yet.