Damien’s Burson Conductor 3X Reference with Paradigm Shift A2

Published on

Sales Burson
November 16, 2022

Post Info

Feedbacks - Conductor 3R | 3XR
Burson Conductor 3 Reference, Burson Conductor 3X Reference, Paradigm Shift A2

Using it primarily for pc desktop setup headphone and speakers. Sound is very clear and the bass is good. massive improvement over standard motherboard sound.. This is what I wanted for a Dac with headphone and mic input. Not many products on market have these features. Will also be using it for a secondary Audio system

The System

Listening with

Paradigm Shift A2

Burson

Burson Conductor 3X Reference · DAC / headphone amplifier / preamp · discontinued

Output power (XLR / SE): 16 Ω 7.5 W / 3.75 W · 32 Ω 5 W / 2.5 W · 100 Ω 1.75 W / 0.88 W · 150 Ω 1.16 W / 0.58 W · 300 Ω 0.58 W / 0.3 W
Output impedance: 0.5 Ω (headphone); 1 Ω (pre out); 25 Ω (DAC out)
Output voltage: RCA 2 V (DAC out)
Gain: High / Low; dB not published
Inputs: 2x XLR; USB (XMOS; PCM to 768 kHz/32-bit, native DSD512); Toslink; coaxial; Bluetooth 5.0 aptX HD; microphone
Input impedance: 40 kΩ
Input sensitivity: line level
Outputs: XLR pre out; line-level DAC out; 6.35 mm + 4-pin XLR headphone
DAC / chipset: 2x ESS ES9038Q2M
Other: Model R180X (3XR); THD <0.0015%; FR ±1 dB 0-58 kHz

^{[1] [2] [3]}

Burson Conductor 3 Reference · DAC / headphone amplifier / preamp · discontinued

Output power (headphone): 16 Ω 7.5 W · 32 Ω 5 W · 100 Ω 1.75 W · 150 Ω 1.16 W · 300 Ω 0.58 W
Output impedance: 0.5 Ω (headphone); 1 Ω (pre out); 25 Ω (DAC out)
Output voltage: RCA 2 V (DAC out)
Gain: High / Medium / Low; dB not published
Inputs: 2x RCA; USB (XMOS; PCM to 768 kHz/32-bit, native DSD512); Toslink; coaxial; Bluetooth 5.0 aptX HD; microphone
Input impedance: 40 kΩ
Input sensitivity: line level
Outputs: RCA pre out; RCA DAC out; 2x 6.35 mm headphone
DAC / chipset: 2x ESS ES9038Q2M
Other: Model R180 (3R); SE only; THD <0.0015%; FR ±1 dB 0-58 kHz

^{[4] [2] [3]}

Specs from manufacturer data unless a source below says otherwise. “calc.” values are worked out from those figures (V = √(P × R); 110 dB SPL used as a loud reference level). Gear listed without specs is not in our spec library yet.