Bass hits harder and feels tighter. Not as distorted at higher volumes. Highs are more balanced and dont sound as harsh as they did with my DT 990 Pro’s.
The System
Listening with
Topping A30 · Headphone amp: desktop headphone amp / preamp · discontinued
- Frequency response: 10 Hz – 200 kHz
- Output impedance: not published
- Gain: 0 / 9 / 18 dB
- Inputs: RCA
- Input sensitivity: 10.0 V (0 dB) / 3.3 V (9 dB) / 1.2 V (18 dB) at PO=Hi
- Outputs: RCA line out; 6.35 mm + 3.5 mm headphone
- Other: max output swing 26.6 Vpp; THD+N 0.0019% (32 Ω, 0 dB gain); SNR 126/121/111 dB by gain; noise 2.2 µV (A, 32 Ω, 0 dB); headphones 16-600 Ω; power per load not shown on retailer page
Burson
Burson V5i Opamp · Discrete opamp (single / dual) · current
- Supply voltage: ±5 V / 10 VDC to ±16 V / 32 VDC (absolute maximum)
- Gain-bandwidth product: 50 MHz (at 100 kHz)
- Dual or single: dual and single (this post uses the dual)
- Package: 11 mm wide × 11 mm deep × 7.3 mm high
Specs from manufacturer data unless a source below says otherwise. “calc.” values are worked out from those figures (V = √(P × R); 110 dB SPL used as a loud reference level). Gear listed without specs is not in our spec library yet.
