Tomas Burson V5i Opamp with Topping A30

Tomas’s Burson V5i Opamp with Topping A30

Published on

Post Info

Easy to install, happy with the sound even the recommended burning is 100hours!

The System

Listening with

Topping A30 · Headphone amp: desktop headphone amp / preamp · discontinued
  • Frequency response: 10 Hz – 200 kHz
  • Output impedance: not published
  • Gain: 0 / 9 / 18 dB
  • Inputs: RCA
  • Input sensitivity: 10.0 V (0 dB) / 3.3 V (9 dB) / 1.2 V (18 dB) at PO=Hi
  • Outputs: RCA line out; 6.35 mm + 3.5 mm headphone
  • Other: max output swing 26.6 Vpp; THD+N 0.0019% (32 Ω, 0 dB gain); SNR 126/121/111 dB by gain; noise 2.2 µV (A, 32 Ω, 0 dB); headphones 16-600 Ω; power per load not shown on retailer page

[1]

Burson

Burson V5i Opamp · Discrete opamp (single / dual) · current
  • Supply voltage: ±5 V / 10 VDC to ±16 V / 32 VDC (absolute maximum)
  • Gain-bandwidth product: 50 MHz (at 100 kHz)
  • Dual or single: dual and single
  • Package: 11 mm wide × 11 mm deep × 7.3 mm high

[2] [3]

Specs from manufacturer data unless a source below says otherwise. “calc.” values are worked out from those figures (V = √(P × R); 110 dB SPL used as a loud reference level). Gear listed without specs is not in our spec library yet.

  1. Topping A30: apos.audio (retailer)
  2. Burson V5i Opamp datasheet V1.0
  3. Burson V5i Opamp product page