Burson Soloist Voyager with ZMF Verite Open, ZMF Caldera and ZMF Atrium Closed

Burson Soloist Voyager with ZMF Verite Open, ZMF Caldera and ZMF Atrium Closed

Published on

Post Info

Wonderful sound

The System

Listening with

ZMF Verite Open · Headphones: open-back, dynamic (vapor-deposited beryllium), circumaural
  • Impedance: 300 Ω
  • Sensitivity: ~97 dB/mW (approx., “~” as published)
  • Frequency response: not published
  • Plugs / cables supplied: not published (ZMF lists no connector type)

[1] [2]

ZMF Caldera · Headphones: closed-back, planar magnetic (CAMS, ADS damping), circumaural
  • Impedance: 60 Ω
  • Sensitivity: ~94 dB/mW (approx., “~” as published)
  • Frequency response: not published
  • Plugs / cables supplied: not published (ZMF lists no connector type)

[3]

ZMF Atrium Closed · Headphones: closed-back, dynamic (biocellulose, N52), circumaural
  • Impedance: 300 Ω
  • Sensitivity: ~96 dB/mW (approx., “~” as published)
  • Frequency response: not published
  • Plugs / cables supplied: not published (ZMF lists no connector type)

[4]

Focal Utopia 2022 · Headphones: open-back, dynamic (40 mm beryllium M-dome), circumaural
  • Impedance: 80 Ω
  • Sensitivity: 104 dB SPL / 1 mW @ 1 kHz ≈ 115.0 dB/V (calc.)
  • Frequency response: 5 Hz – 50 kHz (catalogue); product page 5 Hz – 23 kHz (±3 dB)
  • Plugs / cables supplied: 3.5 mm cable (1.5 m) and 4-pin XLR cable (3 m), both with Lemo connectors; 3.5 to 6.35 mm adapter

Matching notes: At 80 Ω and 104 dB/mW, the Utopia 2022 is a low-impedance load, and an efficient one: about 0.56 V (4 mW, 7.1 mA) for 110 dB SPL (calc.). Burson does not publish a 80 Ω rating for the Soloist Voyager. Its 32 Ω and 100 Ω ratings (8 W XLR / 4 W SE; 3.8 W XLR / 1.9 W SE) fall either side of it. The Soloist Voyager’s 0.5 Ω headphone output impedance is 1/160 of the load. [5] [6] [7] [8]

Burson

Burson Soloist Voyager · Headphone amplifier / preamp (Class-A)
  • Output power (XLR / SE): 16 Ω 10 W / 5 W · 32 Ω 8 W / 4 W · 100 Ω 3.8 W / 1.9 W · 150 Ω 1.3 W / 0.65 W · 300 Ω 0.64 W / 0.32 W
  • Output impedance: 0.5 Ω (headphone); 25 Ω (pre out)
  • Gain: 3 levels: High full power (XLR 10 W / SE 5 W), Medium 50%, Low 10% (IEM); dB not published
  • Inputs: 2x XLR; 2x RCA; mic bypass
  • Input impedance: 38 kΩ
  • Input sensitivity: RCA 2 V; XLR 4 V+ (line level)
  • Outputs: XLR + SE headphone; XLR + RCA pre out; RCA subwoofer out
  • Other: THD <0.0015%; FR ±1 dB 0-48 kHz; Standard/Deluxe: 24V5A PSU or Super Charger 5A, V6 Vivid or V7 Vivid Pro; SP02 installed

[7] [8]

Also in the system

Mojo Audio Mystique X SE

Specs from manufacturer data unless a source below says otherwise. “calc.” values are worked out from those figures (V = √(P × R); 110 dB SPL used as a loud reference level). Gear listed without specs is not in our spec library yet.

  1. ZMF Verite Open: archived page (web.archive.org)
  2. ZMF Verite Open: zmfheadphones.com
  3. ZMF Caldera: shop.zmfheadphones.com
  4. ZMF Atrium Closed: shop.zmfheadphones.com
  5. Focal Utopia 2022: focal.com
  6. Focal Utopia 2022: PDF (dam.focal-naim.com)
  7. Burson Soloist Voyager product page
  8. Burson Soloist Voyager User Manual V1.2 (Burson downloads)