Angelos Burson V5i Opamp with NAD PP2

Angelos’s Burson V5i Opamp with NAD PP2

Published on

Post Info

The stock op amp to be replaced was an NE5532P. The V5i was well burnt in so, I immediately installed a Wima 0.1uF foil capacitor across pins 4 & 8 (a fresh couple of Elna Slimic II 220uF are in order as well as soon as the mail parcel arrives…). The wee old yet proven phono stage was given a new lease of life: better dynamics and different, broader soundstage, increase in detail, tighter and extended bass, and faster attack. Very nice!

The System

Listening with

NAD PP2 · Preamp: MM / MC phono preamplifier (external 24 V supply) · discontinued
  • Gain: 34 dB (MM); 56 dB (MC) at 1 kHz
  • Inputs: phono MM / MC (RCA)
  • Input impedance: 47k + 200 pF (MM); 100 + 180 pF (MC)
  • Input sensitivity: 0.0025 V (MM); 0.0003 V (MC) for 200 mV out
  • Outputs: RCA line
  • Other: S/N 80 dB MM / 78 dB MC (A-wtd); overload 102 mV MM / 9 mV MC at 1 kHz; THD 0.03%; RIAA ±0.3 dB; 135 x 35 x 70 mm

[1]

Burson

Burson V5i Opamp · Discrete opamp (single / dual) · current
  • Supply voltage: ±5 V / 10 VDC to ±16 V / 32 VDC (absolute maximum)
  • Gain-bandwidth product: 50 MHz (at 100 kHz)
  • Dual or single: dual and single
  • Package: 11 mm wide × 11 mm deep × 7.3 mm high

[2] [3]

Also in the system

NE5532 · Dual operational amplifier
  • Operating voltage: ±5 V to ±15 V (recommended)
  • Supply voltage: ±18 V (absolute maximum)
  • Unity-gain bandwidth: 12 MHz typ
  • Dual or single: dual
  • Package: SOIC-8; PDIP-8; SO-8

[4]

Specs from manufacturer data unless a source below says otherwise. “calc.” values are worked out from those figures (V = √(P × R); 110 dB SPL used as a loud reference level). Gear listed without specs is not in our spec library yet.

  1. NAD PP2: PDF (hifigear.co.uk)
  2. Burson V5i Opamp datasheet V1.0
  3. Burson V5i Opamp product page
  4. NE5532: PDF (ti.com)