Burson Conductor 3X GT with Sennheiser HD 800 S

Published on

Sales Burson
September 8, 2023

Post Info

Feedbacks - Conductor GT3 | GT4

Excellent Product. Still waiting for the manual.

The System

Listening with

Sennheiser HD 800 S · Headphones: open-back, dynamic, circumaural

Impedance: 300 Ω
Sensitivity: 102 dB SPL @ 1 V ≈ 96.8 dB/mW (calc.)
Frequency response: 4 Hz – 51 kHz
Plugs / cables supplied: 6.35 mm unbalanced; 4.4 mm balanced

Matching notes: At 300 Ω and 102 dB/V, the HD 800 S is a high-impedance load that needs voltage more than current: about 2.5 V (21 mW, 8.4 mA) for 110 dB SPL (calc.). Burson rates the Conductor 3X GT at 0.64 W (XLR) / 0.32 W (SE) into 300 Ω, which is about 13.9 V / 9.8 V RMS (calc.), roughly 15 dB / 12 dB more than that. The Conductor 3X GT’s 0.5 Ω headphone output impedance is 1/600 of the load. ^{[1] [2] [3] [4]}

Burson

Burson Conductor 3X GT · DAC / headphone amplifier / preamp · discontinued

Output power (XLR / SE): 16 Ω 10 W / 5 W · 32 Ω 8 W / 4 W · 100 Ω 3.8 W / 1.9 W · 150 Ω 1.3 W / 0.65 W · 300 Ω 0.64 W / 0.32 W
Output impedance: 0.5 Ω (headphone); 1 Ω (pre out); 25 Ω (DAC out)
Output voltage: RCA 2 V (DAC out)
Gain: High / Low; dB not published
Inputs: 2x XLR; 2x RCA; USB (XMOS; PCM to 768 kHz/32-bit, native DSD512); Toslink; coaxial (24/192); Bluetooth 5.0 aptX HD; microphone
Input impedance: 40 kΩ
Input sensitivity: line level
Outputs: XLR/RCA pre / DAC out; subwoofer pre out; 6.35 mm + 4-pin XLR headphone
DAC / chipset: 2x ESS ES9038 (suffix not stated)
Other: Model R-181X (“GT3”); THD <0.0015%; FR ±1 dB 0-58 kHz; 24V/5A PSU

^{[2] [3] [4]}

Specs from manufacturer data unless a source below says otherwise. “calc.” values are worked out from those figures (V = √(P × R); 110 dB SPL used as a loud reference level). Gear listed without specs is not in our spec library yet.